- ページ 12

インターホン・システム CAME BPT Agata C200 UKのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。CAME BPT Agata C200 UK 16 ページ。

Wall mounting

Fix the two blanking plugs to the base

Attach the recessed box (with 3 modules

or round Ø 65 mm) flush with the wall

and at a suitable height; fix the base to

the wall using the screws and expansion

plugs provided 2.

In systems where the Larsen effect

might occur, the microphone can be

mounted remotely 4.

To remove the microphone from its

housing, pry it off its base using a

small screwdriver, taking care not to

damage the cabling 3.

Before inserting the microphone into the

bottom of the back-box, use pliers to

remove the part that is highlighted 4.

Insert the audio group high up, near to

the top of the base 4.

Fit the microcontact (bottom right) into

the correct housing 5. The front plate

is equipped with a common call for

the microcontacts, to be used when

other buttons are to be installed

(maximum of 4) 6.

Insert the lighting group in the relevant

housing 7.

Make the connections and secure the

cables using the cable holder 7.

The cable holder must be located near

to the audio group.