- ページ 4
スポットライト Altman Phoenix SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Altman Phoenix Series 4 ページ。 Ellipsoidal spotlight
Altman Phoenix Series にも： 操作、プログラミング、安全マニュアル (12 ページ)
ページを印刷する
INSTALLING SHUTTER PLATES
1.
Pressure Plate (completely at): Install such that the tabs are
on the top and bottom and sides.
2.
Iris and spring plate. Install so that the (4) studs face the
back of the unit.
SHUTTERS
1.
2.
Lens
Lower accessory
cover
50° (4.5 X 6)
Altman Lighting, Inc.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. COPYRIGHT 2012© ALTMAN LIGHTING, INC. ALL RIGHTS RESERVED.
Top latch cover
Barrel screws
Lens retainer
rings
36° (6 X 9)
57 Alexander St., Yonkers NY, 10701
CLEANING/REPLACING LENSES
1.
Remove focus lock knob, push in safety pin and slide lens
barrel out.
2.
Place barrel on a surface so that the two halves are oriented
as the top and bottom.
3.
Remove lower accessory cover with (2) screws.
4.
Remove top latch cover with (2) screws.
5.
Remove (4 ) barrel screws, one on each side.
6.
Carefully remove top half of the barrel.
7.
Replace or clean lenses with mild soap and water, and a
clean, lint-free cloth.
8.
Replace top half of barrel, top latch cover, bottom cover and
re-install screws.
9.
Slide lens barrel back into unit and replace focus lock knobs.
WARNING: Never use glass or window cleaner or any abrasive material to clean
a lens. These types of cleaners will stain the lens surface. Abrasive materials will
damage the surface of the lens.
26° (6 X 12)
1-800-4-ALTMAN
Plate
Stud
Springs
Plate
Studs
Shutter
Plates
19° (6 X 16)