- ページ 2

スピーカー Acoustic Research PL900SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Acoustic Research PL900S 4 ページ。 Audiovox electronics corporation satellite speakers

ページを印刷する

PL900 SPEAKER SYSTEM:

Contents of Carton:

1 Satellite Speaker

HOW TO PLACE YOUR SYSTEM COMPONENTS:

The optimum listening position is at the tip of the so-called "stereo

triangle"(Fig.1). The equilibrium between the right and left stereo channels is

best in this position, providing the most balanced and realistic sound

reproduction.Your AR speakers will operate most efficiently when they are

located in parts of the room with "hard" acoustics, i.e., areas including hard,

smooth surfaces such as walls and wooden furniture. The speakers should

radiate the sound from this hard area into the "softer" parts of the room

containing sound-absorbing elements such as upholstered furniture, carpets

and so on. Make sure that there are no sound-absorbing obstacles between the

speakers and your listening position, as this will muffle the sound and impair

your listening pleasure.Your PL900 Series speakers are fully shielded for use in

audio/video applications. This allows you to place any of the speakers next to

the television without affecting picture quality. If you are using other speakers,

be sure to locate them at least 3 feet away from the television to avoid

interference to the set's picture. The speakers should be installed at least 1

foot away from the side walls. This prevents exaggerated "booming" bass and

helps to produce more balanced, detailed sound reproduction.If possible, the

speakers should be installed so that the tweeters are on the same level as the

listener's ears. If you install the speakers in a wall unit, take care to ensure that

the fronts of the speakers are flush with the front of the wall unit.

CONNECTING THE SURROUND SPEAKERS:

Strip the insulation from the connection cable ends and twist the ends tightly or

tin them with solder. Then insert the ends in the connection terminals and

secure them. Caution: Take care to ensure that the speaker cables are

connected with the correct polarity!Connect the negative amplifier output

terminal (black) to the negative connection terminal of the AR speaker (also

black). Proceed in the same way to connect the positive terminals, which are

normally red. Standard speaker connection cables normally have a colored

marking or indentation in the surface of the insulation to distinguish the two

leads from one another.

IMPORTANT:

Always connect the red (+) terminal on the Receiver to the red (+) terminal on

the corresponding Speaker i.e. Front Left. Connect the corresponding black (-)

terminal on the Receiver to the black (-) terminal on the same Speaker. Continue

until all of the speakers have been connected in this manner.

fig 1

CENTER FRONT

CENTRE-AVANT

LEFT FRONT

RIGHT FRONT

CENTRO FRONTAL

AVANT GAUCHE

AVANT DROIT

FRONTAL IZQUIERDO

FRONTAL DERECHO

SUBWOOFER

HAUT-PARLEUR

DE GRAVES

ALTAVOZ DE

SUBGRAVES

LISTENING AREA

ZONE DʼÉCOUTE

CAMPO AUDITIVO

LEFT REAR

ARRIÈRE

RIGHT REAR

GAUCHE

ARRIÈRE DROIT

POSTERIOR

IZQUIERDO

DERECHO

CONNECTION WITH SPEAKER WIRE

RECEIVER

LEFT REAR

RIGHT REAR

SPEAKER

SATELLITE STAND-MOUNTING: (fig2)

STEP 1 – Screw the provided lock-nuts onto

both threaded ends of the stand tube.

STEP 2 – Connect the stand tube to the base by

turning the base clockwise until it is tight.

Thread the lock-nut onto the stand tube and

fig 2

tighten against the base – locking it into place.

STEP 3 – Connect the speaker to the stand by

turning the speaker clockwise until it is tight

Hex Nut

and lined up with the base. Tighten the lock-nut

against the speaker and lock it into place.

STEP 4 – Connect the speaker wire to the 5-way

binding posts making sure the

positive and negative wires are connected

properly. Failure to match the polarity will result

in the speakers being out of phase.

Round Nut

SATELLITE WALL-MOUNTING: (fig3)

STEP 1 – After marking the level location on the

wall, mount the wall plate to the wall using the

included hardware. Make sure your screws are

securely mounted into the wall studs or that the

Hex Nut

proper anchors are used for a hollow wall

application.

STEP 2 – Securely fasten the bracket head to the

back of the speaker using the included hardware.

STEP 3 – Connect the two bracket components together by placing the

mounting pin on the wall plate into the bracket head mounted to the back

of the speaker.

STEP 4 – Adjust the speaker positioning by swiveling left or right to create a

focused listening position.

fig 3

NO SOUND FROM THE SATELLITE SPEAKERS.

•

Be sure the Receiver's POWER Switch is in the ON position.

•

Check the Receiver's Volume Control Setting - if it is all the way

down, there won't be any sound.

•

Check that the Receiver's Isurround mode is on, and that your source

material is surround encoded and not stereo only.

•

Be sure that the Receiver's Speaker Selector switch is turned to

the position [A or B, 1 or 2] that you have your Front speakers

connected to. If the Receiver has a headphone jack, you can use

headphones to check the Receiver

for output.

ATTENTION IMPORTANT SAFETY PRECAUTIONS:

Please read these instructions thoroughly before attempting to operate your AR

Surround System. Be sure to save this manual for future reference. Also save

your bill of sale, as it may be required for warranty service.

CLEANING:

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

ATTACHMENTS:

Do not use attachments not recommended by AR as they may cause hazards.

WATER and MOISTURE:

Do not use the AR Speaker System near water - for example: near a bath tub,

wash bowl, kitchen sink, or laundry tub; in a wet basement,near a swimming pool, or

similar locations.

HEAT:

The AR Surround System should be situated away from heat sources such as radiators,

heat registers, stoves, or other products (including amplifiers) that produce heat.

ACCESSORIES:

Do not place the AR Speaker System on an unstable cart, stand, tripod, bracket

or table. The product may fall, causing serious injury to a child or adult, and

serious damage to the product. Use only with brackets and stands

recommended by AR or sold with the AR Speaker System. Any mounting of the

speakers should follow AR's instructions and should use a mounting accessory

recommended by AR.

OBJECT AND LIQUID ENTRY:

Never push objects of any kind into this product through openings as they may

touch dangerous voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the AR Speaker System.

SPECIFICATION:

Satellites:

Driver Compliment: Dual 4" with 30mm Super Tweeter

Frequency Response: 100Hz-50kHz + /-3dB

Sensitivity: 88dB, 2.83V/1meter

Nominal Impedance: 8 ohms

Recommended Amplifier Power: 5 to 75 watts

Finish: Extruded Aluminum

Dimensions: 12.25"H x 5.25"w x 4.375"D