- ページ 11

音楽ミキサー Alto LYNX-MIX82FXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto LYNX-MIX82FX 20 ページ。 8-channel mixing console with digital effects

4. CONTROL ELEMENTS

22 AUX RETURNS

TO MAIN MIX, This control is used to control the volume of the processed

signal sent to Main Mix bus, which can be varied from -

TO AUX1 MON, This control is used to control the volume of the processed

signal sent to Monitor Mix, which can be varied from -

23 MAIN/CD/TAPE

If you push down the CD/TAPE TO CONTROL ROOM button, the CD/TAPE IN

signal will be routed into the Control Room output and the level will be adjusted

by the Control Room knob nearby the Main MIX LEVEL knob.

24 CD/TAPE TO MAIN MIX

If you push down the CD/TAPE TO MAIN MIX button, the CD/TAPE IN signal will be

routed into the MAIN output and will be adjusted by the MAIN MIX LEVEL knob.

25 PHANTOM PWR Switch

This button will apply +48 Volt Phantom Power only to the 4 XLR MIC input

sockets. When condenser microphones are not used, please make sure that

the Phantom Power is disengaged.

26 PHANTOM LED

This LED indicates when the PHANTOM POWER is engaged.

27 POWER LED

This LED indicates when your

DSP SECTION(For LYNX-MIX82FX Model)

There is a powerful 24-bit/256 preset digital multi-effects included in your

MIX82FX

Effects include reverbs, chorus, flanger, delay and combinations of the

above.

28 PRESETS

This knob will select one of the 16 Factory Presets.

29 VARIATIONS Control

For each of the 16 Factory Presets you can apply

up to 16 variations, so in total your

MIX82FX

offers 256 different presets. If you want

to know which parameter is modified by this control,

please look at the following chart.

L YNX-MIX82(FX)

is switched on.

L YNX-

to+10 dB.

to +10 dB.

L YNX-

PRESETS

VARIATIONS

PEAK

FX MUTE

1. LARGE HALL