- ページ 14

音楽ミキサー Alto LYNX-MIX82FXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto LYNX-MIX82FX 20 ページ。 8-channel mixing console with digital effects

5. INSTALLATION AND CONNECTION

2=Hot(+)

3=Cold(-)

Use for Balanced Mic Inputs

(For unbalanced use, connect pin 1 to 3)

3-pin XLR Male Plug

(seen from soldering side)

6. APPENDIX

PREFADER AND POSTFADER CONSIDERATIONS

Interesting consideration! Where are the faders in your

Actually a fader is usually regarded as a slider, that is a linear potentiometer. All

potentiometers in your

fader/post-fader description that is quite industry standard and easily

understandable. When your

bus of all input channels is wired post-fader. In this way, the Aux bus can be

used for the internal or external multi-effect. If you want to use the

MIX82(FX)

Aux bus for powered stage monitors, you should disconnect the above-

indicated POST route track and solder the PRE route track like in this drawing. In

this way, the signal is routed to the AUX SENDS output before the Channel

Level control.

AUX

(PRE)

POST

Before

1=Ground/Screen

L YNX-MIX82(FX)

Disconnect

the POST route

2=Hot(+)

3=Cold(-)

Use for Main output

(For unbalanced use, leave pin3 unconnected)

3-pin XLR Line Socket

(seen from soldering side)

are of rotary type but we keep the pre-

leaves the Alto Factory, the AUX

AUX

(PRE)

POST

After

1=Ground/Screen

L YNX-MIX82(FX)

L YNX-

Solder the

PRE route