- ページ 7

アンプ Alto APX1000のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Alto APX1000 8 ページ。

ページを印刷する
Alto APX1000 クイック・スタート・マニュアル
SPECIFICATIONS
POWER SPECIFICATIONS
•
Continuous power @ 0.5% THD: 4 Ohms 390W*2
•
Both channels driven: 8 Ohms 250W*2
•
Power EIAJ@ 1% THD 4 Ohms 500W*2
•
Both channels driven: 8 Ohms 270W*2
•
Bridge Mono Mode: 8 Ohms 1000W*1
20Hz-20kHz 16 Ohms 520W*1
ELECTRICAL SPECIFICATION
•
INPUT SENSITIVITY: 1.0V
•
INPUT IMPEDANCE: 10 K ohm unbalanced
•
FREQUENCY RESPONSE: (at 10dB below rated output power) 20 Hz~25
KHz (+0/-3 dB)
•
VOLTAGE GAIN: 32 dB
•
DISTORTION: (SMPTE-1M) <0.5%
•
S/N ratio: ＞110 dB
•
Inrush Current at initial switch on: 5.85A
•
Inrush Current after power supply interruption: 6.95A
GENERAL SPECIFICATIONS
•
PROTECTIONS: ON/OFF, muting,
fault fuses
•
CONTROLS Front: AC switch
•
CONTROLS Rear: Low pass filter, mode selector
•
SIGNAL INDICATORS: 2 green LED CLIP: 2 red LED
•
POWER INDICATORS: 1 Blue LED PROTECTION: 1 red LED
•
INPUT CONNECTORS: Balanced combo
•
OUTPUT: "Touch-proof" binding posts and speak-on jacks
DIMENSIONS
•
(WxLxH) 483mm x 285mm x 88.8mm; 19" x 11.2" x 3.5"
WEIGHT
•
12.1 lb; 5.4kg
DC-fault load grounding relay. Internal
7