3x10mm Button
3x10mm Button
Head Screw
Head Screw
3x8mm Button
3x8mm Button
Head Screw
Head Screw
3x12 Set Screw
3x12 Set Screw
3x12 Set Screw
3x12 Set Screw
1.5mm Hex Wrench
1.5mm Hex Wrench
2.0mm E-Clip
2.0mm E-Clip
Shock shaft
Shock shaft
P3 O Ring
P3 O Ring
Dumper Adjust
Dumper Adjust
2mm
2mm
Shock Shield
Shock Shield
Ball End Short
Ball End Short
UPPER DECK
UPPER DECK
3x10mm Button
3x10mm Button
Head Screw
Head Screw
SHOCK ABSORBER
SHOCK ABSORBER
2.0mm E-Clip
2.0mm E-Clip
Dumper Piston
Dumper Piston
(1.2 x 2)
(1.2 x 2)
2.0mm E-Clip
2.0mm E-Clip
Shock shaft
Shock shaft
**Use Hobby Knife
**Use Hobby Knife
Front
Front
Rear
Rear
Dumper Adjust
Dumper Adjust
4mm
4mm
Ball End Long
Ball End Long
3x10mm Button
3x10mm Button
Head Screw
Head Screw
3x8mm
3x8mm
Button Head
Button Head
Screw
Screw
Steering Tie Rod
Steering Tie Rod
Steering Tie Rod : 28mm
Steering Tie Rod : 28mm
P3 O Ring
P3 O Ring
Shock Cap B
Shock Cap B
Maximum Length for Front
Maximum Length for Front
61
Maximum Length for Rear
Maximum Length for Rear
Use masking tape to protect Shock Shaft.
Use masking tape to protect Shock Shaft.
Screw Ball End all of the way onto the Shock Shaft.
Screw Ball End all of the way onto the Shock Shaft.
7
Steering Tie Rod
Steering Tie Rod
(Make 2 sets)
(Make 2 sets)
Ball End Short
Ball End Short
3x12 Set Screw
3x12 Set Screw
Keep symmetrical,
Keep symmetrical,
Right and Left.
Right and Left.
Shock Cap A
Shock Cap A
Dumper Top
Dumper Top
Shock Shield
Shock Shield
Shock Body
Shock Body
Fill Shock Oil, when
piston is bottom.
Move the Shock Shaft
up and down slowly to
remove all air bubbles.
Attach Shock Cap A,
when Piston is top.
Spring Stopper A
Spring Stopper A
Dumper Spring
Dumper Spring
Spring Stopper B
Spring Stopper B
Ball End Short for Front
Ball End Short for Front
Ball End Long for Rear
Ball End Long for Rear
Ball End Short
Ball End Short