- ページ 4

スピーカー Alto ELVIS12MAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto ELVIS12MA 7 ページ。 Active speaker cabinet
Alto ELVIS12MA にも：ユーザーマニュアル (14 ページ), サービスマニュアル (19 ページ)

ページを印刷する

4. WIRE CONNECTIONS

-. For Passive Speaker Cabinets

Please use only the power connectors to make connections with other signal source equipment for the passive speaker

cabinets. The power connector has four terminals: 1+, 1-, 2+, 2-.

In our cabinets, only 1+/1- are used to connect the Speaker+/Speaker-, and 2+/2- are not used.

-. For Active Speaker Cabinets

As to these circumstances, audio connections is mostly intended for the signal flow, so, determine the wire configuration

according to your real application system and its connecting facility. Normally, you have the following choices:

Balanced

SLEEVE RING TIP

TIP RING SLEEVE

Unbalanced

TIP RING SLEEVE

TIP SLEEVE

TIP RING SLEEVE

SLEEVE RINGTIP

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Ring

Sleeve

Tip

Sleeve

Tip

Sleeve

SLEEVE TIP

Tip

Ring

Sleeve

1. QUICK START - PASSIVE SPEAKER CABINET

Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely

down.

-. For Passive Full-range Speakers

1). Connect one side of the speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier

and the other side to the Input socket of your speaker cabinet.

2). Complete other connections as illustrated.

3). Turn on your mixer first, then the stereo power amplifier.

4). Turn up the volume controls of your amplifier to about 70%.

5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output

level.

6). After using, turn off your stereo power amplifier first, then the mixer.

Tip

Ring

Sleeve

Tip

Sleeve

Tip

Ring

Sleeve

QUICK START

Elvis Passive Full-range Speakers

speaker cable

Stereo

Power Amplifier

Left

Right

Tripod

Main Mix

Mount

Main Mix

Output

Mixer

Tripod

Mount