- ページ 6

高圧洗浄機 Alto PRO X-TRAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alto PRO X-TRA 11 ページ。 High pressure washer
Alto PRO X-TRA にも：マニュアル (20 ページ)

ページを印刷する

Metal Cleaner

Car Combi Cleaner For cars etc. With rinsing wax.

Alu Cleaner

Oil & Grease

Cleaner

Wood Cleaner

4.0 Maintenance

WARNING! Always disconnect the plug from the

socket prior to maintenance or cleaning.

To ensure a long and problem free working life,

please take the following advice:

Wash out water hose, high pressure hose, spray

lance and accessories before mounting.

Clean the couplings of dust and sand.

Any repair should always be made in an authorised

workshop with original spare parts.

4.1 Cleaning of nozzle

A clogging up in the nozzle causes a pump pres-

sure which is too high. This is why clean ing is re-

quired immediately.

1. Stop the machine and disconnect the nozzle.

2. Clean the nozzle with the cleaning nee dle (10).

IMPORTANT: The needle should only be used

when the spray lance is detached!

3. Flush the spray lance backwards with wa ter.

4.2 Cleaning of water inlet ﬁ lter

Clean the water inlet ﬁ lter (4a) regularly once a

month or more frequently according to use.

1. Detach water inlet hose and coupling.

2. Pull out the ﬁ lter and rinse it carefully.

3. Check that it is intact before re-mount ing it.

Accessories

For cleaning of metal such as

gar den tools.

For surfaces of aluminium.

Applied with an atomizer.

For cleaning of grease and

oil on motors for instance.

Applied with an atomizer.

For cleaning of wooden sur-

faces incl. of wooden garden

furniture.

5.0 Storage

The machine should be stored in a frost-free

room!

Pump, hose and accessories should al ways be

emptied of water prior to storing as fol lows:

1. Stop the machine (rotary switch in pos. O) and

de tach water hose and ac ces so ry.

2. Restart the machine and activate the trig ger.

Let the machine run until no more water runs

through the spray handle.

3. Stop the machine, unplug and detach high

pres sure hose. Both are coiled up and placed

around the handle of the ma chine.

4. Place spray handle, nozzles and other ac ces -

so ries in the holders of the machine.

Should the machine by mistake be frozen, it will

be necessary to check it for damage.

NEVER START-UP A FROZEN MACHINE.

Frost damages are not covered by the

guarantee!

6.0 Questions and an swers

Why do I have to use an atomizer for some de ter -

gents?

Some detergents (except from soaps) must be

applied undiluted. For that purpose an atomizer or

maybe a brush is unique.

Why must the high pressure washer be stored in a

frost free room?

The machine may contain water which, when freez-

ing, may damage vital parts.

How do I store my high pressure washer in the best

possible way?

Always empty the high pressure washer of water

by activating the trigger of the spray handle - after

having disconnected the water supply. Always

detach the high pressure hose and coil it up with out

bending it.

May I use an ordinary detergent in my high pres-

sure washer?

No. You may damage the cleaner and achieve a bad

result. The detergents of AL TO have been specially

developed for use with a high pressure washer and

ensures a correct dosage and a quick effect.

Can I do anything special to keep my high pres sure

washer in a good condition?

Yes, beyond cleaning it carefully before set aside,

it will be a good idea to lubricate the couplings now

and then with grease or vaseline.