- ページ 8
掃除機 Alto SQ seriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alto SQ series 20 ページ。 Wap technology
ページを印刷する
MACHINE OPERATION
Picking Up Dry Substances
Before picking up dry substances, the bag-type filter
should always be installed in the tank. It is then easy
to dispose of the material picked up and the service life
of the main filter element is significantly increased. Dry
cleaning without bag-type filter is also possible.
WARNING: Inflammable substances must not
be picked up with the machine!
After picking up liquids, the filter element is damp.
Damp filter elements can clog more quickly when dry
substances are picked up. For this reason, the filter
element should be dried or replaced before picking up
any dry substances.
Picking Up Liquids
Before picking up liquids, the bag-type filter must
always be removed from the tank.
WARNING: Inflammable liquids must not be
picked up with the machine!
If foaming is observed, stop work immediately and
empty the tank.
Switching On The Machine (SQ 10/15/17 & aero 5)
Turn the switch to position "I" (Figure 6).
Switching On The Machine (aero 7 AS/E)
Two operating modes are possible.
1. Switch position "I":
The machine motor starts immediately.
2. Switch position "auto":
The machine motor starts only when the tool
connected to the appliance plug socket is switched
on (Figure 7).
CAUTION: Before turning the switch to position
"auto", ensure that the tool connected to the
appliance plug socket is switched off.
The motor speed and thus the suction power can be
varied at the suction force regulator. This permits a
precise adaptation to different substances to be picked
up (Figure 7).
After Finishing Work
1. Switch off the machine and pull the plug of the
power cord out of the plug socket.
2. Wind up the power cord around the handle (Figure
8).
Page
-8-
WAP TECHNOLOGY Wet/Dry Vacuums Operator's Manual
Figure 6
Figure 7
Figure 8