- ページ 8
クロスオーバー Alto X-P234のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto X-P234 18 ページ。 2-way/3-way stereo, 4-way mono active crossover
Alto X-P234 にも： ユーザーマニュアル (8 ページ)
ページを印刷する
2.Low Cut
Engage this button to add a 25Hz low cut filter into the input signal path.
3.Low/Mid XOVER FREQ. Control
This knob adjusts the Low/Mid crossover frequency from 44Hz to 930Hz, based on which, the Low/Mid
frequencies can be output separately.
4.Mid/High XOVER FREQ.
This knob adjusts the Mid/High crossover frequency from 440Hz to 9.3kHz, based on which, the Mid/ High
frequencies can be output separately.
5.Delay Control
This knob adjusts the delay time from 0 to 2ms for the low frequencies output, which is proved to be a useful
function in the PA applications, esp. in the large size concert environment.
6.Low Output Gain Control
This control is used to attenuate or boost the low frequencies output by 6dB.
7.Phase Inversion for Low Output
This button will reverse the phase of the low frequencies output by 180 , so that, the low frequencies cancellation
in some fields can be compensated for.
8.Mute for Low Output
This button mutes the low frequencies output.
9.Mid Output Gain Control
This control is used to attenuate or boost the middle frequencies output by 6dB.
10.Phase Inversion for Mid Output
This button will reverse the phase of the middle frequencies output by 180 , so that, the middle frequencies
cancellation in some fields can be compensated for.
11.Mute for Mid Output
This button mutes the middle frequencies' output.
12.High Output Gain Control
This control is used to attenuate or boost the high frequencies output by 6dB.
13.Phase Inversion for High Output
This button will reverse the phase of the high frequencies output by 180 , so that, the high frequencies cancel-
lation in some fields can be compensated for.
14.Mute for High Output
This button mutes the high frequencies output.
15.CD Horn
Abbreviation for 'Constant Directivity Horn', this button can be used to boost the high frequencies, so that the
power loss of it during the long distance transmission can be compensated for.
30.Threshold Setting
To prevent any damage to your speakers effectively, set the threshold of the multi-band limiter at the proper
position.
31.Limiter Control
Engage this button to activate each band's limiter.
33.Stereo Mode Indicator
This LED lights up when the operation is selected in stereo mode.
b. The Rear Panel
STEREO 2-WAY
110-120V
AC INPUT
95-120V /210-240V 60-50Hz
220-240V
Rated Power Consumption 17W
FUSE:
210-240V: T250mAL 250VAC
95-120V: 500mA 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
Apparaten skall anslutas till
A101
jordat uttag nar den ansluts
till ett natverk
MONO 4-WAY
HIGH
NOT USED
LOW
LOW/HIGH
HIGH
MID
LOW
LOW/MID
XOVER FREQ.
1
10
HIGH-MID
NOT USED
NOT USED
HIGH
5
3
4
6
INPUT
MODE
LOW SUM
HIGH
INPUT
LOW SUM
HIGH
MONO
MONO
4-WAY
4-WAY
NOT
NORMAL
VALID
NEW
TIDE
3
SUMMED
2
1
STEREO
3-WAY
STEREO
NOT USED
LF SUM
NOT USED
2-WAY
8
9
10
7
NOT USED
LOW/LF SUM
LOW/HIGH
INPUT
MID
LOW/LF SUM
LOW/MID
INPUT
XOVER FREQ.
1
NEW
TIDE
10
3
2
1
LOW-MID
LOW
LOW/LOW-MID
INPUT
11
12
13
14