- ページ 8

録音機器 Alto MAXI-Q PCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alto MAXI-Q PC 15 ページ。 30+30 band digital equalizer

5. REMOTE CONTROL

To operate one or more MAXI-Q PC units that are connected to a PC, you need to download a Windows compatible

MAXIQ Editor program from our website. To get a copy, please go to http://www. altoproaudio.com/html/download.php

5.1 How to set the MAXI-Q PC's ID number

In order to be recognized from the MAXI-PC EDITOR program, each MAXI-Q PC connected to the PC must have

an ID number.

Select the ID status with the SEL key, the display will show the current ID number of the unit.

Use the UP/DOWN keys to set the ID number.

IMPORTANT!

When several MAXI-Q PC units are connected to a PC for remote control, each of units must have an ID number

different from all the others. If two or more units have the same ID number, they won't be recognized by the PC.

Connect the First MAXI-Q PC to the PC's RS232 serial port, using a 9-pin female plug connected to the RS232

socket on the rear panel of unit.

Connect RS485 IN of the Second MAXI-Q PC to the First MAXI-Q PC's RS485 OUT socket, in this way, you

can connect up to 32 units for a same PC.

IMPORTANT!

If the first unit is placed at a distance to the PC that exceeds 5 meters, RS232 to RS485 converters must be used

to reach it. And the first unit connected to the PC thru RS232 must be switched ON and working, otherwise none

of the other units can be controlled by the PC.

Run MAXIQ Editor program installed in your computer, then select NEW from the FILE menu, now fill out the right

ID number of your MAXI-Q PC that is connected to the PC and press OK button, you will see the opening screen

following (later software versions may differ).

Select OPTION from the FILE menu, then select the right COM port (COM1 and COM2) and proper

BOUDRATE (transmitting

Now go to ACTION menu and then "ONLINE", the PC will scan its selected COM port to check if there are any

MAXI-Q PC units connected. At the lower edge of the PC Editor window will show the search progress and

result. "CONNECT" indicates that MAXI-Q PC and your PC are connected, If the COM port you selected

is wrong or something wrong with your MAXI-Q PC, it will display "DISCONNECT".

At this step, you can click on one of the icons on the PC Editor, a window will appear showing one of several "pages"

where you can set the parameters.

rate

between this unit and your computer).