- ページ 9
音楽ミキサー Alto Professional RMX1508DFXのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Alto Professional RMX1508DFX 12 ページ。
ページを印刷する
TECHNICAL SPECIFICATIONS
MONO INPUT CHANNELS
•
Microphone input: Electronically balanced, discrete input configuration
•
Frequency response: 10Hz to 55kHz, +/–3dB
•
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
•
Gain: 50dB (MIC)
•
SNR: (Signal to Noise Ratio) >90dB
•
Line input: Electronically balanced
•
Frequency response: 10Hz to 55kHz, +/–3dB
•
Distortion: (THD & N) 0.04% at +4dBu, 1kHz
•
Gain: 30dB
STEREO INPUT CHANNELS
•
Line input: Unbalanced
•
Frequency response: 10Hz to 55kHz, +/–3dB
•
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
IMPEDANCES
•
Microphone input: 1.4k Ohm
•
Channel Insert return: 2.5K Ohm
•
All other inputs: 10k Ohm or greater
•
Tape out: 1k Ohm
•
All other outputs: 120 Ohm
EQUALIZATION
•
Hi shelving: +/–15dB @12kHz
•
Mid bell:
+/–15dB @2.5kHz
•
Low shelving: +/–15dB @ 80Hz
DSP SECTION
•
A/D and D/A converters: 24-bit
•
DSP resolution: 24-bit
EFFECTS
•
Hall, Room, Vocal & Plate reverbs Mono & Stereo DELAY (Max delay time 650ms) Chorus, Flanger
& Reverb Modulations, Reverb+delay, reverb+chorus, Reverb+flanger combinations
•
Presets: 16
•
Controls: 16-position PRESET Selector; 16-position Variation selector
Clip LED; Mute Switch with LED indicator
POWER SUPPLY MAIN VOLTAGE
•
100-120VAC ~ 60Hz
•
220-240VAC ~ 50Hz
•
Fuse 100 ~ 120V: T6.3AL; 210 ~ 240V: T3.15AL
•
Inrush current at initial switch-on: 12 A
•
Inrush current after power supply interruption: 13.99 A
STEREO MODE
•
230 W @ 4 ohm(RMS) THD=1%
•
150 W @ 8 ohm(RMS) THD=1%
•
Bridge mode 460 W @ 8 ohm(RMS) THD=1%
PHYSICAL DIMENSIONS (W×D×H)
•
550mm×220mm×310mm (8.66"×12.20"×21.65")
WEIGHT
•
(Net) 13.2kg (28.70 lb)
•
(Gross) 15.93kg (35.11lb)
9