- ページ 3

ラック＆スタンド Balt 27624のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Balt 27624 13 ページ。 Elevation mobile stand

Assembly Diagram

EAD

HROUGH

NSTRUCTIONS FROM BEGINNING

BEFORE

TO END

STARTING TO ASSEMBLE UNIT

1.)

Identify and Separate all the Parts and Hardware.

2.)

Screw in four Casters (A) into the bottom of the

Base (P-1) as shown in Illustration # 1. Tighten

with Caster Wrench (G).

3.) Insert the Left Support (P-2) and the Right Support (P-3) into

the cut outs in the top of the Base (P-1). Use a Washer (C) and

and an Allen Recess Bolt (B) in each of the six holes under the

Base (P-1) to secure the Uprights as shown in Illustration #2.

Tighten Allen Recess Bolts (B) using Allen Wrench (E).

4.) Attach Shelf (P-4) to the one inch support bars on the Uprights using one Panel Clip (D) and two

Wood Screws (F) on each bar. Position the Shelf (P-4) on the support bars and line up the predrilled

holes in the Shelf and the punched holes in each Panel Clip (D) then attach with Wood Screws (F).

#27624

P-1

P-2

P-3

Illustration # 1

P-1

Illustration # 2

P-4

Illustration # 3