- ページ 5

デスクトップ Balt 89853のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Balt 89853 15 ページ。 Command center/portable ay center

Place the Right Side Panel (P2) with the Predrilled holes facing up. Attach

(B) to right Side Panel (P2) and secure using 2 Wood Screws (A3) as shown

in illustration #2.

Install 3 each Cam Posts (E) in the threaded insert nuts (Pre-installed)

as shown in illustration #2.

Install 4 each Wood Dowels (F) in the

4 Holes as shown in illustration #2.

Install 2 Cam Locks (D) into the

10.

2 large holes as shown

in illustration #2.

11.

Separate parts of Door Hinge(G) by loosening Screw (G3)

as shown in Door Hinge Detail. Attach 2 each (G1) to the

right Side Panel (P1) using 4 screws (A3)

as shown in illustration #2.

12.

Place the Front Door (P6) with the 4 Screw Holes facing

up and insert 1 Lock (K) into the large hole as shown in

illustration #3. Press Lock Ring (K1) over protruding end of

Door Lock (K) as shown in illustration #3. Secure using 4

Wood Screws (A2)

13.

Attach 2 each (G2) to the Front Door (P6) using

4 screws (A3) as shown in illustration #3.

Do not Tighten all the way.

14.

Attach Metal Door

Knob (N) to Front

Door (P6) using 1

screw (A5).

15.

Attach 1 Metal

Strike Plate (M1) to

Front Door (P6)

using 1 screw (A7).

(See Slide Detail on Page 3)

as shown in illustration #3.

Illustration # 3

Door Hinge(G) Detail

1 Keyboard Slide

Illustration # 2