- ページ 4
配管製品 Balteco RegoのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Balteco Rego 8 ページ。 Xonyx solid surface
ページを印刷する3.2.
PREVENTING DAMAGE
Some chemicals are not compatible with Solid Surface materials, and could permanently harm
the surface beyond repair. Avoid surface contact with:
Strong chlorinated solvents
•
Chloroform
•
Ketones
•
Methylene chloride, acetone, turpentine (paint removers, nail polish remover)
•
Very strong acids such as concentrated sulfuric and hydrochloric acids
•
Acid drain cleaners, stove and toilet cleaning products should not be used
•
Salts, oils, milks, colourants, and other chemical bathwater additives
•
Other unknown chemicals or chemicals not allowed for cleaning of Solid Surface materials
•
Surfaces exposed to these chemicals should be promptly flushed with water; contact may cause
spots that may require extensive repairs. Remove nail polish with a non-acetone-based nail polish
remover and flush with water.
Avoid subjecting Xonyx™ Solid Surface to extreme hot temperatures or hot objects. Solid
•
Surface has excellent heat resistant properties. However, placing heat-generating appliances or
hot objects, can damage the surface.
Avoid exposing Xonyx™ Solid Surface to strong chemicals listed above.
•
Never cut on a Solid Surface surface to avoid scratching the surface.
•
Avoid dropping heavy and/or sharp objects on the surface as it may harm the surface or
•
altogether break the product beyond repair.
3.3.
DISINFECTING
Solid surface is not manufactured with any material that would promote the growth of any bacteria
such as mold or mildew.
3.4.
CLEANING OF DRAINAGE SYSTEM
The drainage system is assembled from standard plastic drain components. To remove a possible
clog up a standard household drainage cleaning agent may be used that is allowed for such purpose.
Remove the drain cover by turning it contra clockwise (baths) or pull it up/off (shower trays) and
pour carefully the cleaning agent to the drain tube not spilling the pipe cleaner over product
surfaces.
3.5.
REPAIRS
For possible need of repair of the product please contact the dealer for further information. Minor
damage that may accidentally occur is most often repairable.
3.6.
LIMITED MANUFACTURERS' WARRANTY
Limited Manufacturers' Warranty covers the product against concealed defects and/or other
•
defects that appear only if the product has been used according to this installation manual.
Limited Manufacturers Warranty is limited only to repairs and or replacement of defective parts
•
and the Manufacturer does not accept any further liabilities of any kind beyond that.
Limited Manufacturers' Warranty only applies if all shipping, storing, installation, operation and
•
maintenance/cleaning conditions have been duly followed.
Limited Manufacturers' Warranty covers only the replacement of the subparts suffering the
•
defects and does not cover any shipping and/or replacement charges.
Limited Manufacturers' Warranty does not cover normal wear of the unit upon intensive use or
•
any damage to the unit or its sub-parts in result of improper and/or blatant use of the unit.