- ページ 5

計測機器 Camfil PM1 TrackerのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Camfil PM1 Tracker 8 ページ。 Indoor air quality (iaq) measurement device

• PM 1NDEX DEFINITION
The PM 1ndex will give an indication of your Indoor Air Quality and allows you to improve it.
With 50 years of experience in the Indoor Air (and data collection) industry and based on WHO* guidelines
on PM2,5 (annual mean exposition: 10 µg/m
1 (Very Good) to 5 (Very bad).
PM 1ndex
5
4
3
2
1
Sources :
Guideline WHO* on PM2.5: 10µg/
Ambient Air Particle Mass Size Distribution defined in ISO16890: PM1 represents 70 to 80% of PM2,5 value.
Hundreds of measurements in Indoor Environments thanks to Camfil Software: Air Image.
Note: Indoor Air Quality varies due to sources/activity/humans, etc. Always keep in mind that Indoor Air
Quality varies: PM 1ndex mode will provide a mean value for 15 minutes in order to cut off peaks and
erratic values. Don't touch or move the unit during the PM 1ndex measurement.

4. REALTIME MODE

This mode will continuously display different parameters.
It will allow you to see the number and mass of PM1 in a particular situation. Temperature and Relative
Humidity are also displayed.
IAQ measurement: Number of particles (0,5 to 1 µm) and PM1
value in µg/m
Wellness measurement: Temperature and Relative Humidity
• Values of Temperature and Relative Humidity are displayed continuously
• Particle counting is displayed every minute (first display after 1 minute)
• Hold button to stop measurement
• Pressing the Selection Button will allow you to switch from one screen
to the other. The measurement will go on for 10 minutes (otherwise
the measurement stops)
*WHO: World Health Organisation
3
Air Quality
Very bad
Bad
Standard
Good
Very Good
m
3
3
), Camfil have defined an Air Quality Index which ranges from
PM1 (µg/m
)
3
> 8.3
< 8.3
< 3.9
< 1.4
< 0.60
Typical Environment
Industrial or no ventilation
Bad ventilation / filtration or no filtration
Standard office
Good ventilation and filtration
Pure air with air cleaner
Camfil - Clean air solutions
5