- ページ 2

浄水器 Camfil FB SeriesのPDF インストレーション、オペレーション、メンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。Camfil FB Series 20 ページ。 Fluid seal bag-in/bag-out

Disclaimer

Before proceeding with any Bag-In/Bag-Out undertaking, review this

Installation, Operation, and Maintenance Manual and all safety

procedures with your company's safety personnel.

Camfil is committed to providing air filtration products, which meet or exceed our

customer's expectations. We are dedicated to a corporate-wide policy of continual

improvements as a means of insuring our leadership position in the air filtration

marketplace.

The Camfil housings and filters are designed to protect personnel and the general public by

filtering dangerous materials. The filters you change can be contaminated with these

dangerous materials. In order for your complete protection and the protection of the general

public, it is imperative you follow these instructions as amended by your safety personnel.

The bagging method of changing a filter is not fail-safe, but it is the safest, pragmatic

method available for changing a contaminated filter. Since all types of housing designs and

configurations cannot be addressed by a single manual or set of safety procedures, we

propose a proven method of replacing contaminated filters with clean filters. Once this

method is understood by both maintenance personnel and safety personnel, they can adapt

the most suitable method to use, based on the housing, location, type of filter/adsorber, and

any other mitigating factor that can affect safety.

Carefully study this manual and your safety personnel's amendments so that you have the

entire procedure in mind before initiating the change-out procedure. Before initiating this

procedure, verify you have all the necessary tools on hand.

Camfil describes the "twist and tape" method and banding method of sealing the bag in the

manual, but any method approved by your safety personnel is acceptable, including, but not

limited to, thermal sealing of the bag.

Please note: In order to prevent the operator or immediate environment from

contamination, use common sense, adhere to the instructions in this manual and consult

your company's safety manual.