- ページ 7

冷蔵庫 DIVIN DV-636DKのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DIVIN DV-636DK 20 ページ。 Dual-zone wine fridge

DV-636DK Smart Touch Control Panel

*Smart touch control panel is touch-sensitive, just touch the button to operate, no need to press hard.

Left and right temperature display

The number on the left side of the touch panel screen is the temperature display of the

upper-temperature zone, and the number on the right side is the temperature display of the

lower-temperature zone.

For example: when the left number shows 14, the upper-temperature zone is 14°C, when the

right number is 12, it means the lower temperature zone is 12°C

Power button

Turn ON/OFF:

Touch the Power button once and hold for about 3 seconds for turning on the unit. Repeat again

until seeing a "3, 2, 1" countdown to turn off the unit.

NOTE: The countdown is designed for preventing turning the unit off accidentally.

Temperature setting lock/unlock button

To prevent the temperature setting of the wine fridge from being changed by accident, this

fridge allows you to set the temperature after you press this button for 3 seconds.

If you do not press any button after unlocking, it will lock automatically after about 20

seconds.

Temperature adjustment up/down arrow

To adjust the temperature setting, tap the up arrow once to increase 1°C, and tap the

down arrow once to decrease 1°C.

Temperature zone selection

Select the temperature setting of the upper either or lower temperature zone, and view the

current temperature of the upper and lower temperature zones of the wine fridge by using

this button. Press this button after the temperature setting is unlocked, and the touch

control panel will display the current temperature settings for the upper and lower zones.

The temperature of the upper-temperature zone on the left will be flashing first, and then

press this button again to select the temperature of the lower-temperature zone on the

right. The temperature can be set with the temperature up/down button before the number

stops flashing. When the flashing is finished, the temperature setting is completed.