- ページ 3

DJ機材 Divine Lighting Hyper 361のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Divine Lighting Hyper 361 4 ページ。

ページを印刷する

DMX Channel Listing

Channel

Value

(Red)

1-255

(Green)

1-255

(Blue)

1-255

0-255

0-2

Automatic

3-49

Programs

50-100

101-150

151-200

201-250

251-255

Setting Up DMX Connection with an External Controller:

1. Connect the Hyper unit to a DMX Controller (not included) using an microphone

or data cable with XLR connectors. Multiple Hyper units may be connected by

daisy-chaining them together. (Note that XLR input and output jacks are wired in

parallel so that either may be used as input or output.)

2. Set the DMX Start Channel on the Hyper unit so that it is the same as the DMX

Start Channel on the lighting controller.

3. Adjust the DMX channels on the controller to manipulate the light as desired.

Typical DMX Operation:

1. Set Channel 4 (master dimmer) to maximun value.

2. Set Channels 1, 2, & 3 so that the desired color is achieved.

3. If strobing is desired, set Chanel 6 to 10 and adjust speed with Channel 5.

4. Set Channel 4 so that the desired overall brightness is achieved.

Increasing Brightness

Master Dimmer (works with or without Channel 6 active)

Strobe at Increasing Frequency (0=Off)

Adjusts Speed of Channel 6 Features

Channel Not Active

Strobe Mode (Adjust Speed with Channel 5)

Preset Colors (Adjust Color with Channel 5)

Slow Color Fades (Adjust Speed with Channel 5)

Quick Color Fades (Adjust Speed with Channel 5)

Color Cycles by Snapping (Adjust Speed with Channel 5)

Sound Active Mode: Colors Change to Sound

Description

Red Off

Green Off

Blue Off