- ページ 7

3Dプリンター 3DUpFitters 3D Printer Carbon Air FilterのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。3DUpFitters 3D Printer Carbon Air Filter 8 ページ。 Carbon air filter/vent adapter

ページを印刷する

Vent Adapters

Many people ﬁnd the smell of plastic from a 3D printer to be particularly noxious, but there

hasn't been that much research on the long or short term health eﬀects of exposure to 3D

printer fumes. Because the diﬀering nature of the particles and compounds put into the air by

diﬀerent ﬁlaments, there's no standard way of ﬁltering everything, especially since the smallest

particles can't be caught by even the best HEPA ﬁlter.

If you only print occasionally the risk is low, but if you are going to be printing a lot (and

especially for multiple printers), what the

CDC recommends is to vent the 3D printer gasses to

the

outside, such as with one of our vents paired with a standard dryer hose. They can also

hook to any DIY enclosure by simply creating the right size hole.

The vent adapters are designed to ﬁt to a 3" or 4" clothes dryer hose available in any hardware

store. Adjust the hose clamp to be right next to the ridge for the best ﬁt.

The adapters are intended to be ﬂexible so you can design a conﬁguration that's best for your

situation. Here's an example setup with the CR-10/Taz6 vent kit. For this you'd need to order a

hose, clamps, and dryer window vent from your hardware store.