- ページ 15

計測機器 Camille Bauer SINEAX CAMのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Camille Bauer SINEAX CAM 19 ページ。 Graphic display for sineax cam
Camille Bauer SINEAX CAM にも：取扱説明書 (12 ページ)

ページを印刷する

6. Lists

The option Lists allows to perform a

chronological recording of events, alarms or

system messages. At a later time it's possible

to understand and analyse each state

change of the power system and each

intervention to the device in a correct time

sequence.

Alarm list / event list

The list contains all alarms / events, which

has been intended for recording in the alarm

resp. event list using the logic module. For

the entries the texts will be used which have

been defined in the logic module for the

appropriate state change.

All recordings can be displayed on request, with

time stamp and dedicated text. If the security

system has been activated for specific displays

also the involved user is available. This way it's

e.g. possible to see later on which user has

acknowledged an alarm.

access to list information

Via the menu item lists in the main menu the

sub-menu lists can be entered. If no lists are

active or the option is not implemented, then

after the selection of the menu item lists no

further action is performed.

available information

For each list entries with time stamp and

explanatory text may be requested. There is no

list display if still no entries exist or if the list

hasn't been configured for use, e.g. if the

number of events to record is 0.

The following will be recorded with time stamp:

The occurrence of the event

The determination of the event

A possible acknowledgement of alarms will be

recorded in the operator list. Events are not

subject for acknowledgement.

list entry

The time stamp shows the time of the

occurrence of the event. The user defined text

gives further information about the event. Also

given is the number of the associated logic

function. By means of the keys

possible to browse the existing entries.

and

it's