- ページ 10

送信機 Camille Bauer KINAX N702-INOX HARTのPDF プログラミング説明書をオンラインで閲覧またはダウンロードできます。Camille Bauer KINAX N702-INOX HART 15 ページ。 Via the hart field communicator 475
Camille Bauer KINAX N702-INOX HART にも：取扱説明書 (19 ページ), 取扱説明書 (15 ページ)

ページを印刷する

2. Programming use case 1:

Set start and final value

In application case 1, the measuring range of 4...20mA is

between two firm angular positions (e.g. 0° to +60°)

2.1 Programming mode

Select Device setup

Select Diag/Service

Select Calibration

Select Apply values

2.2 Set start value (45 Trim Loop Current Zero)

Put transmitter into initial position, set 4 mA = 0%

(45 Trim Loop Current Zero [4 mA])

2.3 Set final value (46 Trimm Loop Current Gain)

Put transmitter into final position, set 20 mA = 100%

(46 Trim Loop Current Gain [20 mA])

2.4 Definition of direction of rotation

The direction of rotation is defined via setting the trim loop

current zero [4mA], the trim loop current gain [20mA] and

the position of the zero point.

0 Point (43)

cw / ccw

•

0% = 4 mA (37)

•

100% = 20 mA (36)

cw / ccw

•

0% = 4 mA (37)

100% = 20 mA (36)

•

0% = 4 mA (37)

0 Point (43)

•

100% = 20 mA (36)

0% = 4 mA (37)