コントローラー esera automation 11319のPDF 操作説明をオンラインで閲覧またはダウンロードできます。esera automation 11319 4 ページ。 1-wire controller 1 ethernet w/auto-e-connect
esera automation 11319 にも： ユーザーマニュアル (9 ページ)
ページを印刷する
Art No 11319
1-Wire Controller 1 for independent
communication and updating of the 1-Wire
networks
Cyclical output of the processed 1-Wire data in
plain text
No 1-Wire driver (TMEX) necessary
Data logging in case of communication
interruption to the
host system (option)
Power supply for 1-Wire network
Designed for small up to large 1-Wire networks
Top-hat rail cases for the assembly of the
switchboard
Wide power voltage range
Management of all ESERA-Automation
1-Wire modules
1
Introduction
Before you start assembling the 1-Wire Controller 1 and before you take the device into operation, please read
these assembly and operating instructions carefully to the end, especially the section referring to the safety notes.
2
Product description
Independent management
The 1-Wire controller is designed for the independent management of a 1-Wire network. You no longer have to
worry about the 1-Wire commands or formulas in order to evaluate sensor data. The controller independently scans
the 1-Wire network for components (sensors and actuators) and will, depending on the found component, provide
the respective data output, readily converted in plain text.
Formatted data output
The 1-Wire controller ensures the cyclical output of readily processed sensor and actuator data, for instance for
temperature sensors in C°. Only a division by 100 is necessary. Additionally, the article number for ESERA modules
can be supplied, the calculation and the output occur adjusted to the function of the module.
Designed for all 1-Wire networks
The 1-Wire interface of the controller is specially designed to safely handle 1 Wire networks, from small ones up to
very large ones, with long cable sections. 1-Wire sensors can simultaneously be operated, miscellaneously, in
parasitic or normal mode. The currently most powerful 1 Wire interface was used, in order to ensure maximal data
safety for complex network structures as well.
System time / real time clock
Your system does not have a real time clock with battery buffering? No problem, the 1-Wire controller gladly
offers you the clock time with the date. A real time clock with battery buffering is integrated.
All rights reserved. Reprinting,, also in excerpts, without prior permission of ESERA and E-Service GmbH prohibited. Technical changes
reserved. ESERA E-Service GmbH 2016
www.esera-automation.de
Operating instructions
1-Wire Controller 1 Ethernet
11319 Manual 1-Wire Controller 1 ETH V2.2
Page 1 von 4