サーバー ClearCube A3000のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ClearCube A3000 2 ページ。 Clearcube a3000 chassis: quick start
ClearCube A3000 にも： クイック・スタート・マニュアル (2 ページ)
ページを印刷するUpgrading an A3000 Chassis
to an A3100 Chassis
Front Bezel
Rack-Mount Brackets
AC Power Receptacles
ClearCube Technology
Quick Start Guide
Use your A3000 Chassis Upgrade Kit to upgrade a ClearCube
A3000 Upgrade QSG Rev A.fm — Enter your TB topic here
A3000 chassis to an A3100 chassis. Your upgrade kit contains:
•
•
•
The A3100 chassis is a centralized 6U-form factor chassis that
houses as many as 10 A1410 blades. A standard 42U 19-inch rack
can hold as many as seven A3100 chassis, for a total of 70 blades.
Each A3100 chassis contains an expansion backplane to provide
all signal connectors for A1410 blades and an electronic asset tag.
Note: The A3100 chassis does not support A1010 blades.
Upgrade Overview and Chassis Considerations
To upgrade your A3000 chassis, you must:
1. Disconnect power from the chassis and attach the expansion
2. Remove the A3000 front bezel and attach the A3100 front bezel.
Expansion Backplane
After upgrading the chassis, reconnect AC cables to the chassis and
insert your A1410 blades. See the A1410 Quick Start Guide included
with your blades for instructions about inserting A1410 blades.
The A3100 chassis draws air in through the front of the chassis
and exhausts it out the back. If you use a cabinet enclosure,
ensure that you have at least 34 inches (86cm) of interior depth
from the front of the enclosure to accommodate the cabling and
air flow exiting from the rear of each chassis. Spacing between
the front and back rails can be no more than 30 inches (76cm).
Attaching the Expansion Backplane
Chassis
1. Ensure that neither AC power cord is connected to the chassis.
2. From the rear of the chassis, insert the hooks on each side of the
8834 Capital of Texas Hwy N
A3100 front bezel—Compatible with A1410 blades only.
Expansion Backplane—Provides all signal connectors and
chassis ID, or electronic asset tag.
Mounting hardware—Two 6-32 hex head, self-tapping screws.
backplane.
expansion backplane into the slots on each side of the chassis,
then gently lower the backplane until it rests on the chassis.
Expansion
Backplane
and hooks
Austin, Texas 78759
voice 512 652 3500 www.clearcube.com
Chassis with
slots for
backplane
hooks