- ページ 14
サーバー ClearCube A6108のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ClearCube A6108 15 ページ。
ページを印刷する
Using Intel® Active Management Technology (Intel® AMT),
Continued
Accessing Intel
ME BIOS
extension
(continued)
Activate
Network Access
For more
information
ClearCube Technology, Inc.
3
Press CTRL+P during startup (this is the same time you would press, for example, DEL to
display the BIOS setup utility).
4
Use the keyboard to select MEBx Login and press ENTER. If this is your first time logging
in, use the credentials listed in "Default login credentials" above (otherwise, enter your AMT
password). Make any changes appropriate for your environment. If your management console
requires a user name to perform Intel AMT commands, use the user name listed above.
Next steps: Activate network access as shown below to enable management console connections.
This assumes that devices in your environment use dynamic IP addresses. If devices in your
environment use static IP addresses, specify an address in the Network Setup menu in the Intel(R)
AMT Configuration menu noted below.
The steps below enable an AMT management console to connect to a blade. Perform these steps on
each blade you will manage from an AMT management console.
1
Log in to the AMT BIOS extension as shown in the section above.
2
Select Intel(R) Standard Manageability Configuration and press ENTER.
3
Select Activate Network Access and press ENTER.
Result: A message is displayed. Press Y on your keyboard.
4
Press ESC to return to the main menu.
5
Select MEBx Exit and press ENTER. Continue by pressing Y on your keyboard.
Result: The blade boots to the operating system.
6
Power off the blade and return it to an A3100 chassis.
You can now use an AMT management console to perform AMT operations on the blade during any
power state.
To access the Intel
Active Management Technology Web interface from a supported browser, enter
®
the IP address of the blade's primary network interface and port 16992 in the following format
(including the final forward slash): http://nnn.nnn.nnn.nnn:16992/, where nnn.nnn.nnn.nnn is the
device's IP address. If you have not changed the default user, use the name shown in
credentials" above.
See Intel
Active Management Technology (Intel
®
www.intel.com. To find the document, search for the title shown above.
Page
1505 Volta Dr. Suite 100
Step
Action
Step
Action
AMT) Start Here Guide, available at
®
14
of
15
Cedar Park , TX 78641
"Default login
P/N <TBD> Rev A, 1.0.10.9.2020
(512) 652-3500
www.clearcube.com