- ページ 4

サーバー ClearCube CD8620 seriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ClearCube CD8620 series 5 ページ。

Setting up a

Thin Client

Step

(continued)

You can now use remote connection software to connect to a remote computing device.

Depending on configuration, thin clients can include Windows Embedded® Standard 7

User Accounts

operating system. The thin client boots to the Admin user and the default password is an

empty value (blank).

NOTE: Change administrator password immediately after logging in.

ClearCube Technology, Inc.

CD8620-Series/CD6620-Series

Thin Client Setup,

Connect the included power cord and AC adapter, and then plug the adapter

into the rear of the thin client. Continue by plugging the power cord into an

AC power outlet.

Power on the thin client by pressing the power button.

NOTE: The thin client displays the BIOS splash screen and a Windows

operating system animation, then the displays are blank. After several

moments, power off the thin client by pressing the power button, then power

it on again. A message is displayed showing that the Admin user password is

expired and must be changed. The existing Admin password is blank (an

empty value, as noted in

User Accounts

If the thin client contains a smart card reader:

 Install a smart card reader driver on the remote device to which users

connect. Drivers are available at www.clearcube.com/support.

 Be sure that the Windows operating system Smart Card service

(SCardSvr) is running on the remote device to which users connect. See

operating system documentation for more information.

www.clearcube.com

Continued

Action

below).

(866) 652-3500

4 of 5