- ページ 3
コントロールユニット esera automation Shutter Pro V4のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。esera automation Shutter Pro V4 7 ページ。 For external roller shutters, awnings, blinds or venetian blinds and 1-wire bus system w/auto-e-connect
ページを印刷する
Art. No. 11231
7
LED Display, pushbuttons and inputs
The module has green LED indicators for signalling the running direction. The LED`s flash as soon as the
corresponding running direction has been started.
In addition to the buttons on the top of the module, the module has external control inputs. Via the external control
inputs, the shutter module can be controlled with standard roller shutter switching elements, preferably with button
function, from all switch manufacturers, such as Jung, Berker or Busch Jaeger or two individual buttons.
The operation and running direction of the motor output can be controlled via the external and internal buttons.
The motor output can also be controlled via the 1-wire bus interface.
Motor operation triggered by a button on the top of the module or an external control input cannot be read via the
1-Wire interface.
Display
Designation
LED Up
Shutter up
LED Down
Shutter down
LED Up/Down
flash
alternately
Button/Input
Designation
Manual
UP
operation „Up"
module
topside
Manual
DOWN
operation
„Down"
module
topside
Up external,
Push-button
clamp 5
input
shutter up
Down external,
Push-button
clamp 6
input
shutter down
Note: To control the external button interface, a DC voltage source in the range of 10 - 30 V has to be connected.
The connecting cables between module and push-button must be laid insulated from other cables.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
Function
LED flashes, output „upwards" is active for max. 120 seconds
(switch-off by safety switch-off)
LED flashes, output „downwards" is active for max. 120 seconds
(switch-off by safety switch-off)
LED Up and LED Down flashes 6 times alternately after applying the
operating voltage, then the module is ready for operation.
Function
Up and Down pushbuttons have a dual function
-
motor control
-
Switching the operating mode
1 = blind operation with tilting function
2 = shutter operation
Shutter operation:
-
pushbutton => start motor upwards
Blinds operation:
-
short pushbutton action =>Tilting movement for blind, motor Up /
Down,
-
long pushbutton action => Start motor movement Up / Down
Roller shutter operation:
-
pushbutton => start motor upwards
Blinds operation:
-
short push-button action =>Tilting movement for blind, motor Up
-
long push-button action => Start motor movement Up
Roller shutter operation:
-
pushbutton => start motor downwards
Blinds operation:
-
short pushbutton action => tilting movement for blind, motor
downwards
-
long pushbutton action => start motor movement downwards
11231 V2.0 R1.0 Manual
Page 3 of 7