ページを印刷するLast update: 2015/03/25 14:02
To safely turn off the device, press the power switch for about 1 second until the system LED (OS)
starts flashing. The system then shuts down all services and about 20 seconds later, it will power
down.
If for some reason the system is unresponsive, press and hold the power switch for 6 seconds to
forcefully shut down the system and cut off the power.
If the device is not in use for long periods of time, we recommend that you turn off the
device and remove the power supply from the wall socket.
HDD Installation
Push the protruding left edge of the tray handle in to release the tray and use the handle to pull out
the tray.
Install the hard drive, making sure the connector is facing the open side of the bracket. Slide the tray
back into the enclosure and push the handle lightly into place.
From:
http://wiki.myakitio.com/
Permanent link:
http://wiki.myakitio.com/mycloud_pro
Last update: 2015/03/25 14:02
http://wiki.myakitio.com/
mycloud_pro
- MyAkitio Wiki
http://wiki.myakitio.com/mycloud_pro
Printed on 2020/03/09 19:16