ランタン BaltLED TANAGERのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。BaltLED TANAGER 6 ページ。
BaltLED TANAGER にも： インストレーション・マニュアル (7 ページ)
ページを印刷するTANAGER INDUSTRIAL LUMINAIRE
INSIDE THE BOX:
Surface mounting
NEEDED FOR MOUNTING:
L,
mm
310 / 560 / 1060 / 1560
WARNING
! Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
• Perform installation in dry location only.
• Luminaire may fall down if not installed properly.
• Avoid direct eye exposure to the light source while it is on.
• For indoor use only.
• Do not operate luminaire with damaged parts.
• To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
1 /
www.baltled.com
6
th
7
December, 2018
W,
mm
H,
mm
145.5
81 /131.5*
INSTALLATION GUIDE
Cable mounting
* With cable mounting
• The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
If you have any questions, contact the manufacturer.