- ページ 3

電動おもちゃの車 3DVIA Racing 3DV-X1のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。3DVIA Racing 3DV-X1 5 ページ。

3DV-X1

MAINTENANCE GUIDE

The following section is provided to help you with maintenance and repairs to your 3DV-X1. Pay extra attention to the

notes and tips for proper assembly.

www.3DMOJO.com

Front Suspension Arm, Front Shock Tower,

Front Bumper

1. Attach the front bulkhead (51) to the chassis (1)

using the bulkhead hinge pin (103).

2. Secure the bulkhead hinge pin in place using the

3mm set screw (K).

3. Attach and secure the front suspension arms

(38,39) to the front bulkhead using the front inner

hinge pins (95).

4. Secure the rear of the front inner hinge pin with a

2.5mm e-clip (S).

5. Install the front bulkhead brace (50) onto the two

front inner hinge pins.

6. Secure the front bulkhead brace using 2.5mm e-

clips (S).

7. Attach the front shock tower (49) to the front

bulkhead using four 3x10mm round head screws

(C).

Attach the front bumper (2) to the front bulkhead

using four 4-40x5/16" fl at head screws (B).

OPERATI ON MANUAL