- ページ 13

録音機器 ESI Amber i1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ESI Amber i1 16 ページ。 Audio interface with 24-bit / 192 khz
ESI Amber i1 にも：クイック・スタート・マニュアル (3 ページ)

ページを印刷する

ESI

Amber i1

4. OS X / macOS Control Panel

This chapter describes the Amber i1 Control Panel and its functions on the Mac. Under OS X /

macOS, you can find a Amber i1 icon in the Applications folder. Double click on this to launch the

control panel software and the following dialog will appear:

The File menu provides an option called Always on Top that makes sure the Control Panel stays

visible even when working in other software and you can launch the macOS Audio Settings there.

The Config menu allows you to load the Factory Defaults for the panel parameters and you can select

the Sample rate there as well. As Amber i1 is a digital audio interface, all applications and audio data

will be processed with the same sample rate at a given time. The hardware natively supports rates

between 44.1 kHz and 192 kHz.

The Help > About entry shows current version information.

The main dialog has two sections:

INPUT

This section allows you to select the input source used for recording: LINE (= line input on the

backside), MIC (= microphone input), HI-Z (= guitar / instrument input) or MIC/HI-Z (= microphone

input on left channel and guitar / instrument input on right channel). The 48V switch next to MIC

allows you to enable the phantom power for the microphone input.

OUTPUT

This section contains volume control sliders for the two playback channels. Under it there is button

that allows you to MUTE playback.

To control both left and right channels simultaneously (stereo), you need to move the mouse pointer

in the middle between the two faders. Click directly on each fader to change channels independently.