- ページ 4

録音機器 ESI Miditerminal M4UのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ESI Miditerminal M4U 19 ページ。

ESI

2) THRU Mode 1: Input and Output ports will be matched by 1:1. For example,

the MIDI data from Input 2 directly goes to Output 2. All LEDs will be turned

on. After 2~3 seconds, LED will be turned off again. The PWR/THRU LED

will become green color.

3) THRU Mode 2: The MIDI data from Input 4 goes to Output 1~4. LED Display

Input 4 and Output 1~4 would be turned on. After 2~3 seconds, Output 1~4 will

be turned off (Input 4 remains turned on). Output LED will be lit by the signal.

The PWR/THRU LED will become green color.

4) THRU Mode 3: The MIDI data from Input 1 goes to Output 1~4. LED Display

Input 1 and Output 1~4 would be turned on. After 2~3 seconds, Output 1~4 will

be turned off (Input 1 remains turned on). Output LED will be lit by the signal.

The PWR/THRU LED will become green color.

* Three kinds of THRU modes are changed in sequence whenever the button is

pushed in.

Function

Normal

Basic MIDI interface

THRU 1

I/O port matching (1:1)

THRU 2

In 4 -> All MIDI Outputs

THRU 3

In 1 -> All MIDI Outputs

LED signal display

All LEDs will be turned on

After 2~3 seconds, LED will be turned off

again, flickering according to the signal.

In 4, Out 1~4 display will be turned on

After 2~3 seconds, Out 1~4 LED will be turn

off again (In 4 remains turned on), flickering

according to the signal.

In 1, Out 1~4 display will be turned on

After 2~3 seconds, Out 1~4 LED will be turn

off again (In 1 remains turned on), flickering

according to the signal.

Miditerminal M4U