- ページ 3

録音機器 ESI PLANET 22CのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ESI PLANET 22C 7 ページ。 Reference quality dante audio interface

ESI

1. Introduction

planet 22c is an extremely compact interface box that provides 2 analog input and 2 analog output

channels at pristine reference audio quality in a Dante IP audio network.

The lightweight and sturdy I/O solution is equipped with ultra high quality 24-bit / 96kHz analog-

to-digital and digital-to-analog converters. Supporting balanced line audio signals with home (-

10dBV) and professional (+4dBu) signal levels, it works as an ideal interface wherever high quality

audio is needed within the Dante network.

This makes planet 22c ideal to interface any analog equipment such as a traditional mixer, studio

monitors or PA speakers, synthesizers or other electronic instruments and much more with the

Dante world. The linear frequency response and excellent audio quality even makes planet 22c ideal

for audio measurement purposes.

One of the best features is that it can be powered not only via the included 12V DC power adapter

but also directly from the Ethernet cable as a PoE (Power over Ethernet) device. This is perfect

when using it in a remote location.

It can also be integrated into a modern music studio when using the optional Dante Virtual

Soundcard (DVS) software for PC or Mac which makes it compatible with any modern DAW.

2. Hardware

The front and rear panel of the planet 22c hardware has these main features:

1. balanced left channel 1/4" TRS input with two LEDs indicating an active signal and a

possible signal peak level.

2. balanced right channel 1/4" TRS input with two LEDs indicating an active signal and a

possible signal peak level.

3. balanced left channel 1/4" TRS output with LED indicating an active signal.

4. balanced right channel 1/4" TRS output with LED indicating an active signal.

5. RJ45 network connector to connect planet 22c to the Dante network with embedded network

status LEDs.

6. 12V DC power connector that connects to the included DC power supply. If planet 22c is not

powered via the network cable (PoE operation), a power supply must be connected here.

7. power LED that shows if planet 22c is operating.

8. signal level switch for the output signals that allows you to define if the output level is set to

a reverence voltage of -10dBV (common for home and HiFi audio equipment) or +4dBu

(common for professional studio equipment).

planet 22c