- ページ 14
コントローラー dixell CoolMate XLR170CのPDF 設置および操作方法をオンラインで閲覧またはダウンロードできます。dixell CoolMate XLR170C 20 ページ。 Cool mate
ページを印刷する
A
Fig. 6
8.1 WALL MOUNTING
1.
Unscrew the 4 frontal screws (Fig. 1, A, B, F, G) and remove the cover (Fig. 1, C).
2.
Unscrew the 2 screws (Fig. 1, D, E) that keep connected the frontal and lower parts of Cool Mate and separate the 2 parts.
3.
Make the proper holes for cablepresses or pipepresses using the centres signed in the bottom cover of the Cool Mate, (Fig. 3, H, I, ). Then
make 3 holes in the wall, as indicated in (Fig. 3, L, M, N), to fix the Cool Mate
4.
Fix the cablepresses and the pipepresses..
5.
Insert the wall-nugs, contained in the kit, into the holes made in the wall. Then use the o-rings and fix the back part of the Cool Mate (Fig. 3, L,
M, N) by means of the 3 screws to the wall itself.
6.
Insert the wiring cables in cablepresses or in the pipepresses.
7.
Mount the frontal part using the previous 4 screws Fig. 1, D, E, F, G. (do not press excessively in order to avoid plastic deformation).
8.
After connecting the wires to the terminal blocks close the cover (Fig. 2, c) and fix it by the screws.
1592017000 XLR 130-170 GB r2.0 23.03.2015
8.5
0
4
11
14.5
22.5
29.5
Fig. 5
XL130 - XLR170
0
18
Fig. 4
190
186
179
175.5
167.5
160.55
172 190
14/20