- ページ 8

スピーカー ACOUSTIC SOLUTIONS DX 333のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ACOUSTIC SOLUTIONS DX 333 10 ページ。

ページを印刷する

SYSTEM FUNCTION AND OPERATION

1. First make sure that all connections are correctly made:

• Connect the power plug to a suitable mains socket and switch the

DX 333 system ON using the power switch (9).

2. Select the desired input:

• Select AUX (7) on the remote control unit to listen to the analogue

stereo sound source connected to the AUX inputs on the rear panel.

• Select COAXIAL (6) on the remote control unit to listen to the digital

audio source connected to the COAXIAL input connector on the rear

panel.

• Select OPTICAL (5) on the remote control unit to listen to the digital

audio source connected to the OPTICAL input connector on the rear

panel.

3. Listening mode selecting:

• Depending on the type of input selected, pressing the DSP EFFECT

button (2) allows you to select one of the Dolby Digital listening

modes: Theatre, Matrix, Live, Church, Hall, Simul (simulated)

• According to the type of digital input, pressing LISTEN MODE (3)

allows you to select the Dolby Digital decoding options of PRO

LOGIC or STEREO. The DX 333 automatically detects the type of

signal being input from a DVD player, and highlights "Dolby Digital"

if a 5.1 Dolby Digital signal is input, "PRO LOGIC" if the input signal

is Pro Logic, or "Stereo" if a stereo signal is being input.

NOTE: Many DVD discs support multi-soundtrack options, so the

digital signal input to the DX 333 will be determined by the DVD

player settings. The DX 333 stores the last settings when

switched off, and will restore these settings when next switched on.

4. Adjusting the volume levels:

• The volume of the Centre, Surround (rear) and Sub Woofer channels

can be individually set according to personal preference and room

conditions.

• Selecting TEST (4) outputs a white noise signal to facilitate setting

the volume levels the Centre, Surround and Sub Woofer channels.

• Use the +/- buttons (9) to set the sound level of each channel. Press

TEST (4) again to switch off the test tone.

5. Tone adjustment:

• The system tone can be adjusted using the BASS +/- buttons (13)

and TREBLE +/- buttons (14) in the range of +/- 10 dB.

6. Standby:

• If the DX 333 is not going to be used for a while, selecting

STANDBY (1) switches the system into standby (power save) mode,

indicated by the STANDBY indicator on the front panel.

Reselecting STANDBY (1) restores the system to normal operation,

with all previous settings.

NOTE: If the DX 333 is not going to be used for a period of time, it is

recommended to switch OFF the system with the power switch.

7. Mute:

• To temporarily mute the sound output of the DX 333, select MUTE

(8). The MUTE indicator on the front panel indicates the system is

muted. To restore the system to normal operation, reselect MUTE

(8).