- ページ 5
室内装飾品 ESI ESPREEのPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。ESI ESPREE 8 ページ。 Pneumatic table base
ページを印刷するASSEMBLY
STEP 8
Attach a foot to each of the legs.
Refer to the illustrations.
• The left side foot is attached with
four M8x15 screws using the 6mm
Allen key.
• The right side foot is attached with
three M8x15 screws and one
M8x25 screw. The M8x25
screw fits into the threaded
insert on the leg column.
Tighten it with a 5mm Allen key.
STEP 9
Adjust the position of the frame before screwing
it to the table.
• The frame should be centered from side to side.
• The rear of the feet should align with the rear
of the table.
STEP 10
Once the frame is in its final position, attach the
frame supports to the table, as shown.
• Use six #12x1 screws (6 total required).
STEP 11
Attach the release lever at the front of the table
on the left or right side for easy access by the user.
• Use four #8x¾ screws.
• Slide cable clips over the release lever
cable. Position the clips to support
the cable from sagging and attach
the clips with #8x¾ screws.
IMPORTANT: When securing the cable,
the cable should be gently curved to
ensure smooth operation. Do not kink
the cable or form corners with it.
M8x25
5mm
Allen Key
M8x15
6mm
Allen Key
Right-Side
Column
Release
Cable
Lever
#8x¾
ESPREE PNEUMATIC TABLE BASE
M8x15
6mm
Allen Key
Left-Side
Column
Align Rear of Feet with Rear of Table
Center Frame Side to Side
#12x1
Clip
5