- ページ 4

室内装飾品 ClearMirror 1836SLのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。ClearMirror 1836SL 6 ページ。 Led back-lit and side-lit fog-free vanity mirrors

NOTE: Polarity is not relevant - there are neither positive nor negative connections on the

ClearMirror heater pad, nor are there any ground wires

CAUTION: Ensure leads are not stuck between the mirror and the wall.

CONNECT LEADS TO POWER SUPPLY

To connect the mirror heater and mirror wires:

1. Coming through the opening in the back of the unit, twist one of the black wires marked

"HEATER" to one of the black wires marked "LED" and connect to one of the power supply

wires in your junction box using wire connectors.

2. Do the same for the two remaining wires (twist the other black wire marked "HEATER" to

the other black wire marked "LED" and connect to the remaining power supply wire in your

junction box using wire connectors.

3. Wrap wire connectors and wire with electrical tape and push excess into junction box.

COMPLETE WIRING AND MOUNTING

1. Hang mirror on the double hanger system. Use two people.

2. Turn on the circuit breaker and the switch for mirror power supply.

3. Test ClearLite fog-free heater by placing hand on mirror surface. Area will heat in 3 to 5

minutes. LED lights should turn on.