- ページ 5
ターンテーブル Akiyama DX-101 USBのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akiyama DX-101 USB 14 ページ。 Mp3 recording usb turntable
ページを印刷するP
ush the power to on and the
1.
speed indicator and the stylus
illuminator will light up.
2.
Insert target light for illumination the
stylus.
3.
Place a record on the turntable mat.
When playing a 45rpm record with a
large centre hole; place the 45rpm
adapter on the centre spindle.
4.
Set the rotation speed (33/45/78) to
match the record.
5
. Release the arm clamp.
6.
Set the cueing lever to the up
position.
Press the Start/Stop button and the
7.
turntable platter will start to rotate.
8.
Move the tone arm over the desired
groove.
9.
Set the cueing lever to the down
position, the tone arm will descend
slowly onto.
The record and play begins.
Set the desired pitch adjusts range
10.
by depressing the buttons until the
desired pitch is reached.
Options are +/-10%.
11.
Adjust the pitch to a desirable
speed.
12.
To suspend play, lift tone arm with
cueing lever.
When play is finished, raise the
13.
cueing lever, move the tone arm to
the armrest and secure the tone arm
with the arm clamp.
14.
Press the Start/Stop button to stop
the platter rotating.
15.
Turn the power dial to turn off the
power.
DX-101USB OPERATION
AUDACITY SOFTWARE OVERVIEW
Audacity is free software, licensed under the GNU
General Public License(GPL). More information as
well as open source code can be found on the web at
http://audacity.sourceforge.net/
Note : Please ensure you have installed the software
before starting.
Setting up your PC to work withAudacity
1. Connect an input source to the unit
2. Connect the USB lead to your computer
3. Install theAudacity recording software
4. Open theAudacity program
5. Select Preference from the Edit tab in the
Audacity menu
6. SelectAudio I/O tab at the top left
• Under Playback, Device, select your internal
sound card
• Under Recording, Device, select USB Audio
CODEC
• Under Recording, Channels, select 2 (Stereo)
• Check the box marked Play other tracks
while recording new one
• Check the box marked Software Play through
RECORDINGALBUMS WITHAUDACITY
1. Saving a project
• Audacity writes all the changed and recorded
audio to a directory called Projectname_data,
which is located right where you saved the
project file itself
• Thus, select Save project as from your Audacity
File tab and choose a location and filename for
your project
• Please note that when you startup Audacity
fresh, only the "Save As..." menu option is
available.
2. How to record
• Set your USB turntable up to play the song or
album you want to record
• Click on the red Record button to
begin recording.
• Lower tone arm on USB turntable onto album
and track you want to record.
• Click on the blue Pause button to
pause the recording. Press it again to
continue.
• Click on the yellow Stop button.
That's it. You can now play around with your
recording and explore the editing capabilities of
Audacity.
Remember that you can use the Undo function
almost without limits while the project is open.
Note: CD's cannot be burned directly from the
Audacity application. Other CD burning
applications should be used.
SAVING FILES IN MP3 FORMAT
Audacity software saves files in Wav and Ogg
Vorbis format. For saving files in MP3 format you
will need files x"lame_enc.dll" for Windows and
file "LameLib" for Mac.
To get these files for Windows & Mac OSX:
Click at:
http://audacity.sourceforge.net/help/faq?s=install
&item=lame-mp3&lang=es
Windows
- Access download page LAME.
- Click at any "lame-3.96.1" file, they are the
same.
- When LAME files download is finish save it in
you PC.
- At Audacity, when exporting to MP3 format
software will ask for lame_enc.dll file.
Mac OSX
- Access download page LAME.
- LameLib in to your MAC
.
- Use Stuffit Expander to extract files.
- Save file "LameLib" in your MAC.
- Audacity, when exporting to MP3 format
software will ask for LameLib file.
If you have any trouble with this chapter contact
us at
4