- ページ 5
会議システム ClearOne CONVERGE PRO 2のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ClearOne CONVERGE PRO 2 12 ページ。 Next generation audio dsp platform
ClearOne CONVERGE PRO 2 にも： クイック・スタート・マニュアル (9 ページ), インストレーション・マニュアル (11 ページ), クイック・スタート・マニュアル (8 ページ)
ページを印刷する
MOUNT THE GPIO EXPANDER
The GPIO expander can be mounted in 1) a rack shelf , 2) under
the table, 3) on the wall, 4) above the ceiling. Each mounting type is
explained below. Mounting hardware is not provided.
r
s
M
ack
helf
ountIng
ClearOne offers a standard 1U rack shelf with 20lb (9kg) weight capacity.
ClearOne 1U Rack Shelf
(Part No. 910-6106-001)
1.
Determine location for rack shelf.
2.
Align mounting holes on rack shelf mounting ears with holes on the
rack (at determined location).
3.
Insert the four #10-32 screws included with the ClearOne 1U rack
shelf (or proper screws for your 3
NOTE: Remove pre-installed mounting ears on expander to fit up to 3
expander units side-by-side on a single ClearOne 1U rack shelf.
4.
Torx drive screws secure the pre-installed mounting ears to the
main body of the expander unit. Remove them with a Torx T15
screwdriver. (optional)
QUICK-START GUIDE
-party mount) and tighten.
rd
3