- ページ 10
デジタルカメラ CamOne Infinity SER1516QのPDF マニュアルをオンラインで閲覧またはダウンロードできます。CamOne Infinity SER1516Q 20 ページ。
ページを印刷するturn on video & images
Here you can perform the main settings.
Languages:
Date:
Time:
Auto Screen Off:
Auto Power Off:
Motion detection:
Flip picture:
Image mirroring:
Light Frequency:
Video System:
OSD:
Status LED:
Card formatting:
Factory setting:
Firmware:
!
Please note that some functions are only available after a firmware/software update.
Using the DiveBox and different Mounts
Put the camera into the front side of the DiveBox at first and lock it. Please make sure that the
fastener of the box is properly locked. The cam can still be operated though the buttons. The
rubber seal has to be clean and undamaged. Please also make sure that the camera lens and
the interior of the DiveBox are clean as well. A high air moisture can condense on the interior
side of the lens. Use anti-mist pads to reduce or avoid that.
!
When using the bike or helmet mount, please make sure that the adjusting screws are
fixed tightly. Mounts that use the adhesive pads must have a clean and non- lipid surface.
System Settings
Choose between German, English, French, Spanish, Italian, Dutch,
Norwegian or Russian
Year-Month-Day. Switch through menu using the M-Button
Hour:Minute. Switch through menu using the M-Button
Screen will be switched off to save battery: Off, 30, 60 or 120 Sec.
Select the Auto off function: Off, 60 Sec., 120 Sec. or 300 Sec.
Off, low, medium or high
Off or flipped by 180°
Off or mirrored
Before you start recording indoors, make sure to set the correct
Hz-frequency of your electricity grid:
Europe, Asia and Australia
America
Japan
NTSC or PAL
Display icons ON or OFF
Switch front LEDs On or Off
Slot 1 or Slot 2 (All recorded data will be deleted!)
Resets the camera
Information about current firmware and update
– 50 Hz
– 60 Hz
– 50 or 60 Hz (depending on the area)
10