- ページ 5

デジタルカメラ CAMONS DW9020HRのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。CAMONS DW9020HR 12 ページ。 Digital wireless rear observation/backup camera system

2.Before drilling the hole,make sure there are no components behind the surface

you are drilling such as electrical cables,gas lines,or other important components

that can be damaged.

3.After drilling the hole,insert the supplied grommet then route the camera cable

into the opening.

The grommet must be used to prevent the metal edge from cutting the cable.

4.Locate the power source required:Backup lights if used as a backup camera or

running/marker lights is used as a rear observation system.

5.Once you have located the power source,route the camera cable to that location.

Never route the cable on the outside of the vehicle.

6.Connect wires as diagram below.

7.Make sure the battery's negative terminal is disconnected. After determining

the positive and negative wires, splice the wires using the quick connectors

included.

8.Reconnect the negative terminal to the battery.

Monitor Installation

Make sure the monitor is mounted in a location that will not obstruct your vision

while driving.

1.Suction Cup Mounting.

a.Slide the suction cup mounting bracket's head into the monitor's back metal

clip.

b.Before mounting the monitor, clean the mounting surface well.

c.Position the suction cup to your wind shield.

d.Press the suction cup against the surface and press the lock down to fix it.

CAM

reversing light's power

GND