- ページ 9

キッチン家電 ABC PROIZVOD Concept 2 mini airのPDF テクニカル・インストラクションをオンラインで閲覧またはダウンロードできます。ABC PROIZVOD Concept 2 mini air 16 ページ。 Central heating cookers

5.3.INSTALLATION

Central heating cooker may be connected to open system (F. 5) and to closed system (F. б) of

central heating utility, since the cooker has built-in thermal safety feature – a heat exchanger.

Thermal valve is not delivered with the cooker.

Preferably connect the cooker to open central heating system, and connection of a thermal valve

with a probe to the cooker is however mandatory as well as connection of the heat exchanger to

water supply network. Warranty shall be void without the thermal valve connection.

All cooker joints need to be properly sealed, which should be visually checked before

commissioning.

A final step in the mounting procedure is to fill the cooker and all the utilities with water up to the

required pressure.

DO NOT USE THE COOKER WITHOUT WATER.

Picture 5 Scheme of cooker connection to open central heating system

1. Cooker Concept 2

2. Smoke tube

3. Open expansion vessel

4. Discharge pipe

5. Manometer

6. Radiator valve

7. Radiator

8. Air valve

9. Circulation pump

10. Safety valve

11. Thermal valve

12. Water supply connection line

12'. Hot water drain

13. Thermal valve probe

14. Supply line

15. Safety valve connector

16. Returning line

17. Load and unload connector 1/2"