- ページ 7
マイクシステム ClearOne DIALOG 20のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ClearOne DIALOG 20 8 ページ。 Usb wireless microphone systems
ClearOne DIALOG 20 にも： クイック・スタート・マニュアル (14 ページ), クイック・スタート・マニュアル (6 ページ), インストレーション・マニュアル (8 ページ)
ページを印刷する
_____________________________
ClearOne
®
Mounting Antennas to Wall, Ceiling or AV Rack:
1
Mount antenna over-head and within line of site to
transmitters. The dipole antenna's reception is strongest
at the sides of the antenna with a null point at the tip.
Therefore, it is best to tilt the antenna so that the side faces
the transmitters.
• Wall Mount
• Ceiling Mount
• Ceiling Mount RX with PoE to CONVERGE® Pro 2
or Beamforming Mic Array 2
• AV Rack Mount
Separation distance of antennas should be a minimum of
2
2' (ft.) and maximum of 30' (ft.).
3
Attach TNC panel mount connector (C) and secure both the
antenna and the extension cable (E) to the antenna extension
bracket (A) by using a non-conductive adhesive on the threads
of both sides of the TNC Panel Mount Connector (Fig. 8).
4
Attach the other end of the extension cable to the DIALOG 20
Receiver and secure by using a non-conductive adhesive on the
threads of the Female TNC Connector.
5
Repeat steps 1 to 4 for the second antenna and extension cable.
Suggested Mounting Options:
To Receiver
Fig. 9
Plenum-Rated Antennas
Mounted in the Crawl
Space above the Ceiling
Tiles using 3rd party
"T-Bracket".
Professional installation is required. Installer is responsible for securing antennas with
a non-conductive adhesive and ensuring mounting hardware is appropriate to their
particular installation.
DIALOG
20
®
.
(Fig. 8)
.
(Fig. 9, 10, 11)
.
(Fig. 12)
To Receiver
Fig. 10
Plenum-Rated Antennas
Mounted below the
Ceiling Tiles.
.
(Fig. 11)
Receiver Mounted on
Outside of Ceiling Tile
with PoE to CONVERGE
Pro 2 or Beamforming
Apply
Non-Conductive
Adhesive
Fig. 8 Antenna
Bracket Assembly
Wall Mounted
Power Over Ethernet
To CONVERGE Pro 2 or
Beamforming Mic Array 2
Fig. 11
Mic Array 2
Fig. 12
Antenna
Position
AV Rack
Mounted
7