- ページ 6

タブレット AIMobile ATC63E SeriesのPDF スタートアップマニュアルをオンラインで閲覧またはダウンロードできます。AIMobile ATC63E Series 10 ページ。

ページを印刷する

Exploring the ATC63E

Before you can use your ATC63E, you must fully charge

the battery. Connect the power adapter as shown and

leave to charge for:

• A minimum of 10H 9m when using the internal battery.

Condition: The operation time is based on the LCD

brightness at 16%, Battery saver, Idle mode, Wi-

Fi/BT/camera/ALS off, Half of max volume (50%).

Installation Procedures:

Connect the male end of the power adapter to the DC-in

of ATC63E.

Connect the male end of the power cord to the DC power

adapter.

Connect the 3-pin male plug of the power cord to an

electrical outlet.

NOTE: Be sure always handle the power cords by holding

the plug ends only.

Connecting the Power

DC-in connection： When the battery is low, connect

the adaptor and power cord to the socket, and the

device is charging.

NOTE: Unplug when fully charged.

Audio Jack connection: Support earphone only.

Connect the headphone cable to hear the sound.

USB3.0 type A: Data transfer only. When using the

USB-A cable, make sure to connect right cable to

the appropriate connector.

NOTE: Not support headset function.

HDMI connection: Audio and video transmission.

Please use a HDMI cable with a HDMI logo.

USB-C connection: Data transfer only. Use the

USB-C cable to connect the appropriate connector.

RJ-45 connection: Connect ethernet cable to the

appropriate socket in an environment without WIFI.

NOTE: Incorrect cable connections may result in irregular

operation, damage display quality/components and/or

shorten the module's life.

System message

Root cause: HDD PWD incorrect 3 times

Solution: Please reboot and input the correct HDD PWD

Root Cause: try to boot by PXE but no bootable PXE

server

Solution: Please make sure LAN cable connected, or

please ignore PXE boot (by SSD boot)

Root cause: your bootable device(efi) without sign , and

SECURE BOOT is ON.

Solution: Turn off secure boot and use the bootable

device with signature(signed).

Root cause: once you try to boot by SECURE BOOT ON

but failed, you can't back to turn off SECURE BOOT

directly.

Solution: Please turn off system then boot up and turn off

SECURE BOOT.

已註解 [SD17]: Information provided indicating where the

installation instructions may be found or information on

qualified personnel who can perform the installation

產品安裝資訊, 包含 VESA mount 安裝注意事項

已註解 [H黃A18R17]: 增加圖文說明