- ページ 8
メディア・コンバーター ClearOne CONNECT AVBのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ClearOne CONNECT AVB 16 ページ。 Network audio bridge for converge pro & sr products
ページを印刷するCONNECT NETWORK BRIDGES
UPDATING CONNECT COBRANET/AVB FIRMWARE
NOTE: All CONNECT CobraNet/AVB Pro units in the site must be
running firmware level 4.X to be compatible with the CONVERGE
Pro/SR units in the site.
1.
Connect the E-bus cable between the CONVERGE Pro units and
the CONNECT audio network bridge.
2.
Connect the CONVERGE Pro units with CONVERGE Console.
3.
Open the Firmware Loader screen.
4.
Browse for the CONNECT firmware file: cobranet.mdo for the
CONNECT CobraNet, and avb.mdo for the CONNECT AVB.
5.
Download the CONNECT audio network bridge firmware.
6.
The CONNECT audio network bridge will default and reboot after
the download of the firmware. (The version of the firmware can be
verified later using the Unit Properties screen for the CONNECT
network bridge.)
7.
Units are fully upgraded. (All units connected via the E-bus on the
site are simultaneously updated.)
8.
Restore the saved site file to the system using CONVERGE
Console.
6