- ページ 15

ドリル Altocraft 68125136のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Altocraft 68125136 20 ページ。 18v cordless drill / driver

ページを印刷する

IMPORTANT SAFETY INSTRUCTIONS

11. Avoid accidental starting.Be sure switch is off before plugging in. Carrying

tools with your finger on the switch or plugging in tools with the switch on invites

accidents.

12. Remove adjusting keys before turning the tool on. A wrench or a key that is left

attached to a rotating part of the tool may result in personal injury.

13. Do not overreach.Keep proper footing and balance at all times. Proper footing

and balance enables better control of the tool in unexpected situations.

14. Use safety equipment.Always wear eye protection. Dust mask, non-skid safety

shoes, hard hat, or hearing protection must be used for appropriate conditions.

POWER TOOL USE AND CARE

15. Use clamps or other practical way to secure and support the work piece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

16. Do not force tool.Use the correct tool for your application. The correct tool will

do the job better and safer at the rate for which it is designed.

17. Do not use tool if switch does not turn it on or off. Any tool that cannot be

controlled with the switch is dangerous and must be repaired.

18. Disconnect the plug from the power source before making any adjustments,

changing accessories, or storing the tool. Such preventive safety measures

reduce the risk of starting the tool accidentally.

19. Store idle tools out of reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

20. Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools with sharp cutting edges are less likely to bind and are easier to

control. Do not use a damaged tool.Tag damaged tools"Do not use" until repaired.

21. Check for misalignment or binding of moving parts, breakage of parts,and

any other condition that may affect the tool's operation. If damaged,have the

tool serviced before using. Many accidents are caused by poorly maintained

tools.

22. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous when

used on another tool.

BATTERY TOOL USE AND CARE

23. Ensure the switch is in the off position before inserting the battery pack.

Inserting the battery pack into power tools that have the switch on may cause an

accident.

24. Recharge only with the charger specified by the manufacturer. A charger that

is suitable for one type of battery pack may create a risk of fire when used with

another battery pack.

25. Use power tools only with specifically designed battery packs. Use of any

other battery packs may create a risk of injury or fire.

26. When battery pack is not in use, keep it away from other metal objects like

paper clips, coins, keys, nails, screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the terminals together may cause

burns or a fire.

a. Do not use the tool in wet or damp conditions.

b. Always keep the work area free of tripping hazards.

c. When using the tool, always ensure you are wearing protective safety equipment

including safety glasses/goggles, ear muffs, dust mask and other protective clothing

including gloves and apron.

27. Under abusive conditions, liquid may be ejected from the battery; avoid

contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the battery may cause irritation

or burns.