- ページ 9
ターンテーブル 1 BY ONE H005のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。1 BY ONE H005 14 ページ。 Belt drive turntable system
5. Recording
Then, ignoring any instructions in the manufacturer's guide to select "stereo mix",
simply press the Record button
in Transport Toolbar to start recording from the
turntable.
6. Recording, editing and exporting
Once your USB turntable is set up and working properly, go to the Basic Recording,
Editing and Exporting section of Audacity's Tutorial - Copying tapes, LPs or
MiniDiscs to CD for instructions on how to:
• make and edit your recording
• export it to an audio file
• import it to iTunes or Windows Media Player
• burn it to CD
Audacity's reference links:
Basic Recording, Editing and Exporting : https://manual.audacityteam.org/man/
•
basic_recording_editing_and_exporting.html
Tutorial - Copying tapes, LPs or MiniDiscs to CD : https://manual.audacityteam.
•
org/man/tutorial_copying_tapes_lps_or_minidiscs_to_cd.html
Maintenance and Cleaning
NOTE: Disconnect the power cable plug from the outlet as a precaution before
maintenance.
Turntable Body
Your turntable requires little of no regular maintenance. Remove dust with a slightly
damp antistatic cloth; never use a dry cloth as this will create static electricity and
attract more dust! Antistatic cleaning agents are available at specialist stores, but must
be applied sparingly to avoid damage to rubber parts. It is recommended to install the
needle cover before cleaning or maintenance is carried out to avoid damage.
If the turntable is not used over a long period of time, the drive belt should be
removed to prevent unequal stretching.
NOTE: Always disconnect the record player from the power supply as a precaution
before maintenance!
Useful Tips
The turntable should be positioned on a low-resonance surface such as wood or
14
multiple layer ply board to avoid structural vibrations disturbing playback.
Stylus Tip
• If dirt and grime are stuck to the stylus tip, clean it
with a commercially-sold brush.
• We recommend using a stylus cleaner (not
included) if the stylus tip is considerably dirty.
Clean the stylus tip by moving the brush from the
rear to the front of the stylus tip.
Replacing the Stylus
Removing the Stylus
• In addition to the deterioration of sound quality, records may also be damaged as
the cartridge's stylus tip wears down.
• As a rule of thumb, replace the stylus after 300 to 500
hours of use.
• Be sure to disconnect the product's power cable plug
from the outlet.
1. Remove the protector from the cartridge.
2. Remove the stylus by pulling in the direction of the arrow.
Installing a New Replacement Stylus
1. Grasp both sides of the stylus holder and insert the stylus grip into the rear tab of
the cartridge.
Stylus holder ②
Stylus grip ①
2. Push up the stylus holder until it clicks and locks completely in place.
Do not leave any space
Engage the rear tab rst
15