ページを印刷する
Tools required to assemble and adjust your 3G Bikes bicycle are not
included .
Tools you might need:
1. Rubber Mallet
2. Allen Key Set (3, 6 in particular)
3. Metric Wrench Set (14, 15, 17 in particular)
4. Standard Wrench Set (3/4" in particular)
5. Adjustable Wrench
6. Standard Screwdriver
7. WD40 (or similar lubricating product)
Right out of the box our bicycles come partly assembled although not
completely adjusted. Use this list as an assembly guide and go through
each part making sure that everything is secured correctly and tightened.
1. Seatpost, Seatpost Clamp and Saddle.
2. Crank Set and Pedals.
3. Install fork.
4. Assemble and Install Rear Wheel.
5. Install Front Wheel
5. Install Chain
6. Install Handlebars.
7. Install Shifter, Levers and Grips.
8. Install cables (and breaks if external)
9. Install Pedals.
10. Posture Setup.
11. Safety Check.
CAUTION - Remember that you should always thread nuts,
bolts and pedals on by hand at first to ensure they do not cross
thread