- ページ 10
テント ClearSpan 103938のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ClearSpan 103938 15 ページ。 Frame 20' wide x 20' long
ページを印刷するCLEARSPAN
JUBILEE TENTS
™
FRAME ASSEMBLY (CONTINUED)
6.
Using the diagram below, lift each leg pipe and slip the
appropriate short cross or 3-way open corner onto the
leg pipe.
TOP VIEW
LOWER BASE ASSEMBLY
Lower Base Rafter
Short Cross
Short Cross
Short Cross
Lower Base Rafter
7.
Slide each fitting up the leg and position it 8" to 9" from
the corner or side coupler (center-to-center) as shown
in the pictures below. Secure with 5/16" hex key. Set
screws are loosened and retightened when pipes are
added.
8" - 9"
8.
Beginning at a corner, slide each lower base rafter
into place as they are positioned in the diagram and
work around the frame and back to the starting corner.
Secure each rafter by tightening the fittings with a 5/16"
hex key. Assistance is required to assemble the lower
base assembly.
10
Lower Base Rafter
Short Cross
Lower Base Rafter
8" - 9"
NOTES:
Spread the leg pipes apart to fit the lower base rafters
into the fittings.
If needed, remove corner leg to fit the final rafter into
the final fitting, and replace corner leg.
9.
Continue by squaring and anchoring the frame.
Revision date: 07.01.08